Course Outcomes (COs)

SE-to-BE-CBCGS 2016

S.E.

SEM III

• Applied Mathematics - III
• Applied Thermodynamics
• Manufacturing Engineering – I
• Material Science & Engineering
• Mechanics of Solid
• Computer Aided Machine Drawing Lab
• Data Base Information Retrieval System Lab
• Material Testing Laboratory
• Manufacturing Process – I Lab

SEM IV

• Applied Mathematics - IV
• Dynamics of Machines
• Manufacturing Engineering – II
• Fluid & Thermal Engineering
• Electrical and Electronics Engineering
• Dynamics of Machines Lab
• Fluid & Thermal Engineering
• Electrical and Electronics Lab
• Manufacturing Process – II Lab

T.E.

SEM V

• Design of Mold & Metal Forming Tools
• Operations Research
• Machine Design-I
• CAD/CAM/CIM
• Metrology & Quality Engineering
• Department Level Optional Course I
• Design of Mold & Metal Forming Tools Laboratory
• Machine Design-I Laboratory
• CAD/CAM/CIM Laboratory
• Metrology & Quality Engg Laboratory
• Business Communication & Ethics

SEM VI

• Machining Science and Technology.
• Process Engineering and Tooling.
• Production Tooling.
• Machine Design – II
• Production and Operation Management
• Department Level Optional Course II
• Machining Science and Technology Laboratory
• Process Engineering and Tooling Laboratory
• Production Tooling Laboratory
• Machine Design-II Laboratory

B.E.

SEM VII

• Industrial Training and Project

SEM VIII

• Automation and Control Engineering
• Computer Aided Manufacturing
• Engineering Economics, Finance, Accounting and Costing
• Total Quality Strategy
• Industrial relations and Human Resource Management
• Elective-I 

First Year B.Tech

Second Year B.E.

Third Year B.E.

Final Year B.E.

First Year B.Tech

Second Year B.Tech

Third Year B.E

Final Year B.E.

Academic Year 2018-19

ICIMA 2018 – International Conference on Intelligent Manufacturing and Automation was held on 20th and 21st July 2018. About 109 research articles were submitted for the conference. After a thorough review process comprising of 23 eminent academicians and industrialists, 66 papers were finally accepted to be presented at the conference.  Springer, a leading international publisher in this field will publish the Conference Proceedings digitally under the series Lecture Notes in Mechanical Engineering. Additional details of the book such as ISBN, etc. is available https://www.springer.com/in/book/9789811324895

Academic Year 2017-18

ISME (Indian society of manufacturing engineers) organized two-day technical festival named “DJ Nirmiti-Igniting Manufacturing Renaissance”. DJ-NIRMITI was held on 20-21 of March 2018. It was the perfect platform for all the technical as well as non-technical lovers in the field. A huge amount of participation wrote great stories of their success. Major 4 events grabbed everyone’s eyes were Bridge the Gap, B-Plan, Project Competition & Cadd Challenge saw footfall of about 500 Students.

Academic Year 2016-17

• A two day technical festival named “DJ Nirmiti-Igniting Manufacturing Renaissance” on 21st & 22nd March 2017. It had a footfall of 500 budding engineers. The event offered final year students with an opportunity to present their projects to veterans from the sphere of academia and industry. It also kindled a spirit of manufacturing and designing through events like Bridge the Gap and CAD Challenge for Engineering Year Students.
• Production Engineering Students participated in Enduro Student India –National Level Off-road Racing Competition organized by Delta Inc. and sanctioned by FMSCI. It was held at the Gedee Advanced Driving Institute, Coimbatore, 5- 9 January 2017.
• Production Engineering Students participated in BAJA SAE India – National Level Off- road Racing Competition organized by SAE India and Mahindra & Mahindra. It was held at the NATRAX Facility, Indore.
• Production Engineering Students participated in SAE aero-design West competition on 10th, 11th and 12th of March 2017. Total of 75 teams participated from worldwide in this competition. Team DJS Skylark managed to achieve the following titles under its name.

1.      1st worldwide in design report

2.      4th worldwide in flight rounds

3.      12th worldwide in technical oral presentation

4.      1st overall amongst all teams participating from India

5.      1st overall amongst teams participating from Asia

6.      4th overall worldwide at the passenger class (Regular)

• Clay Modelling Competition was organized by SAE chapter on 4th October, 2016.

Academic Year 2015-16

• A Seminar and Project Competition jointly organised by The Department of Mechanical Engineering &  Department of Production Engineering on “31st March and 1st April, 2016” for the students to learn and comprehend various industry related issues and topics.
• Production Engineering Students participated in SAE International AERO Design East – International level RC Aircraft design competition organized by SAE International. It was held in Fort Worth, Texas, USA in March 2016.
• A competition on Clay Car modeling was organized on 24th August, 2015. It was judged by Prof. E. Narayanan, Mentor , Production Dept.

               Academic Year 2014-15

• Seminar-cum-Project Competition "Expanding Horizons in Manufacturing Sector" was organized by ISME on 16^th & 17^th March 2015.
• Production Engineering Students participated Formula Student Germany an International Race Car Design Competition conducted by SAE International in July – August2014 at Hockenheimring, Germany.
• Production Engineering Students participated BAJA Student India – National Level Off-road Racing Competition conducted by SAE India in collaboration with TATA Motors in January 2015.
• Production Engineering Students participated  SAE Aero Design East competition which was held this year at Lakeland, Florida from 13th March to 15th March 2015 and it stood 17th worldwide and 2nd in India in our category

Academic Year 2018-19

• Skill enhancement Programme 2 was second edition of internship fair which was conducted from December 19, 2018 onwards. It was 10-14 day certified training programme in manufacturing units in an around Mumbai.
• A Seminar was organized by Inspirus Education on “Education Abroad” on 11^th February 2019.
• ISME had organized a workshop on “Rapid Prototyping Tool – 3D Printing” on “13th February 2019” for the students to learn, understand and observe the Process of Additive Manufacturing & 3-D scanning. The workshop was conducted in the college premises by Mr. Guruprasad Rao, CEO , Imaginarium.
• A Seminar was organized by In Education Street on “GRE Counselling” on 5^th March 2019.

Academic Year 2017-18

1. DJS Skylark conducted aero-modelling workshop in drawing hall 5^th floor, Production Engg, Department. 200 students had participated in event. They were divided into 50 teams, comprising of 4-5 students each.

Academic Year 2016-17

• A workshop cum hands-on session was organized by Metal Safety NDT training Institute Pvt. Ltd. on 5th February 2017 under Indian Society of Manufacturing Engineers (ISME).
• A workshop cum hands-on session on 3-D Printing was organized by Imaginarium (India) Pvt. Ltd. in our college on 11th February 17, 2017 under ISME (Indian Society of Manufacturing Engineers).
• The talk was delivered on Jet Propulsion Engines on 4th Feb, 2017. The talk was helpful to students as it introduced them to the widely used technology of.
• An invited talk was organized by ISHRAE on ‘Refrigeration & Air-conditioning’ by Prof. Avinash G. Shaligram on 4th March 2017.
• An invited talk was organized for TE Mechanical students by Team RAS on Industrial Mechatronics by V. A. Kaushik, Consultatnt from FESTO on 13th February, 2017.
• The students of the production engineering department were taken on a two day sheet metal workshop to L&T Corporate Technology & engineering academy, Madh organized by the student chapter- ISME on 25th October, 2016.
• All the students were given a brief orientation after which the training of the students commenced according to the predetermined schedule. The four modules taught to students were:-
   
• Fabrication and Welding
• Industrial Safety
• Machining Operations
• Press Tool

Academic Year 2015-16

• ISME had organized a workshop on “Sheet Metal Forming” on “5th October, 2015” for the students to learn, understand and observe the Process of Sheet Metal Forming. The workshop was conducted at the L&T Corporate Training Centre, Madh Island
• ISME had organized a workshop on “Rapid Prototyping Tool – 3D Printing” on “16th and 17th March, 2016” for the students to learn, understand and observe the Process of Additive Manufacturing. The workshop was conducted in the college premises.
• ISME had organized a seminar on “Business Analytics” on “1st February, 2016” for the students to learn and understand the use of Business Analytics. Mr. Mukesh Jain, currently Vice President and head of NICE Systems, Pune shared his career beginnings and experiences at Microsoft USA and Reliance Jio.
• An invited talk on “Project Based Learning” on 4th February, 2016 by Dr. Sandeep Inamdar (Managing Trustee, Vishwaniketan)
• An invited talk on “Introduction to Oil, Gas and Power Sector” on 22nd March, 2016 by Mr Vasant Dinkar Mestry (Chairman and MD, Suvidya Institute of Technology).
• A one-day invited talk was conducted on 10thFebruary, 2016 the topic of talk was ‘Achieving Comfort Ventilation by combining Traditional Indian Practice and Modern Technology.

Academic Year 2014-15

• An introductory workshop on ‘3D Printing and additive manufacturing technology’ was conducted by 3D Ware on 27,28th February 2015. Various topics covered under the workshop were:-

1. The 3rd Revolution
2. The 3d Opportunity and additive manufacturing
3. The Technical aspects and introduction to Online communities.

• Talk on “3D printing, a New Tool to Unlock Fragile Ideas” on 19th September, 2014 by Dr. Guruprasad Rao (Director-Technology and Operations at Imaginarium India Pvt Ltd).
• An invited talk on “Engineering Capabilities in Process Equipment Management” by Mr Alex Tellis of M/s Godrej and Boyce Ltd. Vikhroli was conducted on 4th February 2015.A Guest lecture was held on “Jet Propulsion Engine” by Mr. F A Shaikh of Air India on 2nd March 2015.
• Seminar on Career Opportunities Abroad September? 2014 by Ms. Purvi Tantia from Ace Consultancy.
• An Invited talk on “Solar energy” by Ankit Barasia, Director-Solar Inertia was conducted on 11th February 2015.
• A Guest lecture was held on “Piping” by M/s Suvidya Institute of Technology, Santacruz on 13th March 2015.

Academic Year 2018-19

• An industrial visit was conducted for third year students from Production Engineering Department on 12^th August 2018 to SKI PLASTOWARE PRIVATE LIMITED, Asangaon.
• An industrial visit was conducted for third year students from Production Engineering Department on 14^th August 2018 to PANDHARINATH FOUNDRY, Goregaon.
• An industrial visit was conducted for third year students from Production Engineering Department on 25^th August 2018 to CHEMICAL PROCESS EQUIPMENT PRIVATE LIMITED, Govandi.
• An industrial visit was conducted for third year students from Production Engineering Department on 11^th September 2018 to KALYANI MAXION WHEELS LIMITED, Chakan, Pune.
• An industrial visit was conducted for third year students from Production Engineering Department on 11^th September 2018 to MUTUAL INDUSTRIES LIMITED, Chakan, Pune.
• An industrial visit was conducted for third year students from Production Engineering Department on 02^nd October, 2018 to MUTUAL INDUSTRIES LIMITED, Vasai.
• An industrial visit was conducted for third year students from Production Engineering Department on 02^nd October, 2018 to DEEP INDUSTRIES, Vasai.
• An industrial visit was conducted for second year students from Production Engineering Department on 10^th October, 2018 to FRIENDS HEAT TREATMENT, Goregaon.
• An industrial visit was conducted for third year students from Production Engineering Department on 02nd February, 2019 to LARSEN & TOUBRO LIMITED, Malad, Madh.
• An industrial visit was conducted for first year students from Production Engineering Department on 13th April, 2019 to MAHINDRA & MAHINDRA LIMITED, Chakan, Pune.

Academic Year 2017-18

• An industrial visit was conducted for third year students from Production Engineering Department on 27th July 2017 to TATA motors Chakan.
• An industrial visit was conducted for second year students from Production Engineering Department on 4th oct 2017 to Western & central railways EMU cars shade (Virar & Mumbai).
• An industrial visit was conducted for second year students from Production Engineering Department on 19th Aug 2017 to Godrej Plant no 15, Vikhroli.
• An industrial visit was conducted for First year students from Production Engineering Department on 10th Nov 2017 to Mahindra & Mahindra, Nashik.
• An industrial visit was conducted for second year students from Production Engineering Department on 18th Jan & 25th Jan 2018 to Bharat Forge and Adico Forge Pune.
• An industrial visit was conducted for all students from Production Engineering Department on 12th Feb 2018 to Hindustan Aeronautical Limited.
• An industrial visit was conducted for First year students from Production Engineering Department on 19h march & 20h march 2018 to TATA motors Pune.

Academic Year 2016-17

• An industrial visit was conducted for third year students from Production Engineering Department on 26thAugust 2016 to Indian Tools, MIDC Satpura, Nashik & Mahagenco (Maharashtra State Power Generation Company), Eklahare, Nashik.
• An industrial visit was conducted for third year Production Engineering Students on 23^rd September 2016 to Tata Motors, Chakan.
• An industrial visit was conducted for Third Year students from Production Engineering Department on 27th September, 2016 to MAHA GENCO Gas Turbine Power Station, Uran.
• An industrial visit was conducted for Second Year students from Production Engineering Department on 27th September, 2016 to Chaphekar Engineering, Pune.
• An industrial visit was conducted for Second & third Year students from Production Engineering Department on 6^th February, 2016 to “HIND ALUMINIUM” and “RSJ METALS”.
• An industrial visit was conducted for second and third year students from Production Engineering Department on 13th April to Bajaj Auto Ltd., Chakan.

Academic Year 2015-16

• An industrial visit was conducted for 3rd year students from Production Engineering Department on 2th March 2016 to ‘Amtek Forging’, Chakan, Pune.
• An Industrial visit was conducted for second and third year students from Production Engineering Department on 10th March 2016 to Godrej Security Solutions, Ambernath.

Academic Year 2014-15

• An industrial visit was conducted for 2nd and 3rd year students from Production Engineering Department on 26th February 2015 to „Godrej and Boyce? Ltd.
• An industrial visit was conducted for 3rd year students from Production Engineering Department on 9th April 2015 to Amtek Forging and Volkswagen at Chakan, Pune.

Academic Year 2018-19

• Guest lecture was organised by ISME on 5th October, 2018.First, Jitendra Shah sir who is a partner with Deloitte. He talked about the "Exponential technologies in manufacturing, Transforming the future of manufacturing Engineers. The topic being highly related to the students attending, his lecture was very informative for all students.Secondly, Dr. S Greep who is the director of the Khadi Gram Udyog. The product "Khadi being historically rich in India and very important to most rural people. Sir spoke to us about how livelihood of rural people can be increased by the industry and what are the needs and future expectations.

• Guest lecture was organised by ISME on 8^th October, 2018 on “Manufacturing Plastic furniture using mould” by Sougata Datta , Quality Assurance & Process Engineering Head , Nilkamal Private Ltd.

Academic Year 2017-18

• Guest lecture on “Quality Management” was conducted by Dr Tushar Desai, Professor of Mechanical Engineering Department in NIT Surat on 12th September 2017 under Indian Society of Manufacturing Engineers (ISME) banner.
• Guest lecture on was conducted by “Digital Payments/Transactions” by Mr Sourabh Tomar, Sr. Manager and head of business intelligence of NPCI on 15th September 2017 under Indian Society of Manufacturing Engineers (ISME) banner.
• Union Budget – Decoded (A discussion Union Budget by Mr. Vikash Mittersain, president of India business group, Mr. Jay Kalra, practicing chartered accountant and Mr. Amit Trivedi , co-founder at www.investworks under Indian Society of Manufacturing Engineers (ISME) banner.
• Guest lecture on “3D Bio-printing” of Tissues was conducted by Dr Rohan Shirwaiker, Assoiate Professor, North Carolina State University was conducted on 4th February 2017 under Indian Society of Manufacturing Engineers (ISME) banner.
• Guest lecture on “Introduction to EPC & Energy Sector and Opportunities Available” was conducted by Mr.Vasant Dinkar Mestry (Chairman and MD, Suvidya Institute of Technology)  on 5th March 2018 under Society of Automotive Engineers (SAE) banner.

Academic Year 2016-17

• A talk was delivered on “Jet Propulsion Engines on 4^th Feb.2017” to undergraduate students from Mechanical and Production Departments. The talk was organized by SAE chapter helpful to students as it introduced them to the widely used technology of Jet Propulsion Engines. Also he threw light on the factors for newly graduated students in job point of view.
• An invited talk was organized by ISHRAE on ‘Refrigeration & Air-conditioning’ by Prof. Avinash G. Shaligram on 4th March 2017.

Academic Year 2015-16

• ISME had organized a seminar on “Business Analytics” on “1st February, 2016” for the students to learn and understand the use of Business Analytics. The lecture was conducted by Mr. Mukesh Jain, Vice President and Head, NICE Systems, Pune.
•  An invited talk on “Total Quality Management” by Mr K.B Bharati (Director, QCFI India) focused on improvement of quality and implementation of Total Quality Management Concepts in Indian Manufacturing Industry.
• An invited talk on “Project Based Learning” was conducted by SAE on 4th February, 2016 by Dr. Sandeep Inamdar (Managing Trustee, Vishwaniketan)
• An invited talk on “Introduction to Oil, Gas and Power Sector” on 22nd March, 2016 by Mr Vasant Dinkar Mestry (Chairman and MD, Suvidya Institute of Technology).
• A one-day invited talk was conducted on 10thFebruary 2016 , on the topic‘Achieving ComfortVentilation by combining Traditional Indian Practice and Modern Technology by   ISHRAE

Academic Year 2014-15

• An Invited talk on “Campus to Corporate” by our alumnus Mr Darshit Shah was conducted on 11th February 2015.
• L&T Technical Lecture Series was conducted by ISME on 29th & 30th January 2015 Managers, senior deputy managers and the Principal of L&T Institute Of Technology visited our college and interacted with our students and also shared their work experience in their area of expertise.
• An invited talk on “Total Quality Management” by Mr K.B Bharati (Director, QCFI India) focused on improvement of quality and implementation of Total Quality Management Concepts in Indian Manufacturing Industry.
• An invited talk on “Made in India: From an Idea to Reality” by Dr. B Ravi Professor IIT Bombay on 23rd September2014 emphasized the use of E Foundry and ORTHOCAD.
• SAE conducted invited talk on “Engineering Capabilities in Process Equipment Management” by Mr Alex Tellis of M/s Godrej and Boyce Ltd. Vikhroli was conducted on 4th February 2015
• A Guest lecture was held on “Jet Propulsion Engine” by Mr F A Shaikh of Air India on 2nd March 2015.
• An Invited talk on “Solar energy” by Ankit Barasia, Director-Solar Inertia was conducted on 11th February 2015 by ISHRAE.
• A Guest lecture was held on “Piping” by M/s Suvidya Institute of Technology, Santacruz on 13th March 2015 by ISHRAE.

Academic Year 2013-14

• A Guest lecture was held on “Skills required by Mechanical/Production Engineers in Industry” by Mr. Pradeep , Siemens Corp.on 13^th August 2013 it was conducted by SAE.
• A Talk on Robotics  was given by Dr,James Mclurkin , Asst. Prof. , Rice University on 14^th March 2014 it was conducted by SAE.
• An Invited talk on Heat Treatment was conducted in October 2013 by ISME, Mrs. Sonal Dhar , Visting Faculty of Mech. Engg. Dept was invited to deliver this talk.

Academic Year 2018-19

Ansys Training

Date of Commencement: - 23-08-2018

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - CADD CENTER, ANDHERI

ISME Production Department has organized 60 hours training session on ANSYS in collaboration with CADD Centre. 26 students registered for this VAP course.

Academic Year 2016-17

Ansys Training

Date of Commencement: - 26^th July 2016

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - CADD CENTER, ANDHERI

Keeping in view the fierce competition the students have to face in outside world and need for skill expertise. ISME Production Department has organized 60 hours training session on ANSYS in collaboration with CADD Centre. 12 students registered for this VAP course.

Industrial Pneumatics

Date of Commencement: - 26-12-2016

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - Advanced Training Institute

ISME Production Department has organized one week training session on Industrial Pneumatics in collaboration with Advanced Training Institute.

CNC Programming for turning

Date of Commencement: - 02-01-2017

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - Advanced Training Institute

ISME Production Department has organized two week training session on CNC Programming and Machining on turning in collaboration with Advanced Training Institute.

Project Management Skills

Date of Commencement: - 23^rd Feb 2017

Organized by: - ISME Production Department

Organized For: - TE and BE Production Students.

Conducted by: - CADD CENTER, ANDHERI

ISME Production Department has organized 40 hours training session on Primavera Software training in collaboration with CADD Centre. 16 students registered for this VAP course.

Advance tool and die making

Date of Commencement: - 04-07-2016

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - Advanced Training Institute

ISME Production Department has organized two week training session on Press tool making basic (Blanking, Piercing, and Progressive) in collaboration with Advanced Training Institute.

Industrial Hydraulics VAP

Date of Commencement: - 02-01-2017

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - Advanced Training Institute

ISME Production Department has organized one week training session on industrial Hydraulic in collaboration with Advanced Training Institute.

Academic Year 2015-16

Solid Works Modelling Software training

Date of Commencement: - 20^th August 2015

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - CADD CENTER, ANDHERI

ISME Production Department has organized 60 hours training session on Solid Works Modelling Software training in collaboration with CADD Centre. 10 students registered for this VAP course.

Academic Year 2014-15

Ansys Training

Date of Commencement: - 7^th February 2015

Organized by: - ISME Production Department

Organized For: - SE and TE Production Students.

Conducted by: - CADD CENTER, ANDHERI

Keeping in view the fierce competition the students have to face in outside world and need for skill expertise. ISME Production Department has organized 60 hours training session on ANSYS in collaboration with CADD Centre. 15 students registered for this VAP course.

1. Design of sliders for plastic injection moulds and feaseability study of additive manufacturing for tool rooms
2. Advancements in 3D Printing technology, Material testing, Flame Resistant Materials
3. Productivity Improvement of Interchangeable systems of AF machines by standardization of processes and Ergonomic designing of workstations  
4. Integration of 3D Printing in L&T's K9 Vajra & Planning and Execution of Joystick Assembly 
5. Reduction of Inventory Costs by Salvaging Free Stock and Implementation of 5S and Continuous Improvement
6. Assembly line balancing
7. Plant layout for Coating Shop & Intricacies in Phosphate coating 
8. Design of Test Rig for Hydraulic Naval Ship Stabiliser
9. Fine Tuning of Planning Documents, Cost Reduction of Heat Exchangers
10. Productivity Improvement through Design Improvements in Welding Positioner, Optimization of Preheating Methods for Welded Joints and Setting up Methodology of Tank Rotators
11. Improvements in the procurement and storage of tooling materials for m/c shop and CNC department.
12. Defect Analysis of HP Feed Water Heater using QC Tools & Implementation of Lean Manufacturing Techniques in the Insertion of Tube Bundle in Heat Exchangers
13. Process development and Die designing for Sheet Metal components
14. Lead time reduction in assembly of Encapsulation machines by introduction of Material replenishment systems
15. EAM & LN Integration for spare part management and standardization of parts
16. Implementation of QR code for tracking and improving material management on shop floor
17. Reduction in cycle time of Nozzle Fabrication Process
18. Standardization of Mould design and implementation of 5s
19. Development of a Procedure to Check Tube to Tubesheet Joint Expansion and Automated Shell Marking System 
20. Cost Reduction Through Optimization of Calibration Interval
21. Design of lifting assembly for submerged arc welding (SAW) machine
22. Migration from OHSAS 18001 to ISO 45001
23. Evaluation and optimization of welding of PSLV middle segments and design of inventory tracking system
24. PROCESS PLANNING OF AUTOMATIC FILLING SERIES MACHINE FOR COST OPTIMIZATION
25. Design of Plate Alignment Fixture for Rolling Machine
26. Reduction in Stock Variance by using Material Management Techniques
27. Assisting and Catalyzing the Communications and Marketing Process
28. Tube to tubesheet orbital welding of Titanium
29. Design of Cost Effective Semi-electric Hand Pallet Trolley
30. Implementation of LEAN Six Sigma on shop floor
31. Optimisation of the machining Parameters and implementation of 5S
32. Design of fixture for stiffness test of helical torsion spring
33. Increasing the efficiency of conveyorized powder coating system by fixture modification &
34. Harnessing the light energy emitted by LED light fittings during soaking process by using solar panels 
35. Improvement in material feeding system by introducing kitting concept for assembly of AF90T machine
36. Standardization of sliders and lifters in a mould and Implementation of 5s
37. RE-DESIGNING AND DRAFTING OF NON-STANDARD TERMINAL BOX
38. Improvement in Material Procurement and Stores Functioning 
39. Successful execution of drilling & machining of titanium tubesheets
40. spare optimization and design of fixture for helical torsion spring
41. Fixture for measuring boundary conditions of MCCB(Frame 6)

Project evaluation process

Table for assessment methods

Rubrics:

Stage 1 Presentation

Stage 2 Presentation

Evaluation by Internal Guide

Report Preparation

Project evaluation process

Table for assessment methods

Rubrics:

Stage 1 Presentation

Stage 2 Presentation

Evaluation by Internal Guide

Report Preparation

1. Product improvement through innovative design.

2. Prouctivity Improvement in Switchgear assembly line.

3. Development and modification of moulded case circuit breakers.

4. E-Solutions for SLDC- a. Minimizing Response time with the customer. b. Selection of components. c. Weight omputation. 

5. Improvement of censafe Assembly line.

6. Increase in productivity of Inner Body Cell Unit.

7. Analysis & improvement of Record Protecting Equipment Manufacturing.

8. Cost optimization of plastics and copper parts of air circcuit breaker.

9. Implementation of Six Sigma ans Product development of LED well glass & Glass ring.

10. Lead time reduction through value stream mapping of AF90T machine.

11. Productivity improvement of AF90T machine assembly line.

12. Standardization of AC Air Compressors (1- 1.5 T).

13. Optimization of Chassis Assembly line and quality evaluation.

14. Process improvements & Kaizen implementation in press shop.

15. Root cause analysis for ovality in wind tunnel nozzle sections.

16. Introduction of TPM culture in securities solutions division.

17. TPM Stabilization & Process Improvement.

18. Design of painting fixture and material handling trolley for traction motor assembly shop.

19. Development and testing of thermo-magnetic release.

20. Design and development of rotor assembly of switch disconnectors.

21. Improvement in shot blasting process through modified screw conveyor design.

22. Cost reduction of 2L mortise lock & good padlock designing.

23. Geometric modelling and analysis of methanol wash column using  pv-elite software.

24. Process improvement of robotic stud welding.

25. Eradicating Oil leakage through exhaust manifold of two cylinder engines.

26. Welding Optimization & resource management.

27. Project Planning & expediting of gasifier reactor.

28. Inventory Control & planning of electrical system equipments (ESE) & Modification of packaging standards for ESE.

29. Inventory management of drilling and turning inserts & Enhancing overall equipment efficiency of vertical lathe machine

30. Time study and analysis of SPF line

31. Efficiency Enhancement of hardware procurement & streamlining of plating details.

32. Cost & Time Reduction using CPM-PERT for base welded feet

33. Trouble shooting and parametric optimization of tube to tube sheet welding.

34. Manufacturing sequencing and fabrication cycle time estimation of residence vessel.

35. Enhancing orbital tube welding efficiency in heat exchangers & Development of inventory layout for electro welding strips.

36. Exploring implementation of hot wire TIG welding for better results & Development of ESSC fixture to overcome the use of FCAW.

37. Cost reduction of balancing ring & manufacturing feasibility of shaft by upset forging.

38. Optimization of assembly line of 35B5 product and material management using ERP system.

1. Fabrication and Chemical Cleaning of Sodium-Air Heat Exchanger.

2. Development of LCA Machine.

3. Development of Special Purpose Machine.

4. Defects, Troubleshooting & Quality Improvement of Safes. Time Study of Safe Assembly Workstations.

5. Design Aspects of Hydrotest Saddle Supports.  Design Aspects of Long seam welding Fixture.

6. Value Stream Mapping. Defect Analysis. Overall Equipment Effectiveness.

7. Total Productive Maintenance and Heat distortion Control.

8. Standardization of Air Compressors.

9. Value Engineering of Circuit Breaker Packaging.

10. Lead Time Reduction & Zero based costing analysis.

11. Value stream Mapping of Astro Lock.

12. Value Engineering of contact in circuit breaker.

13. Elimination of black soot emission from low-velocity gas burners.

14. Process Improvement on RPE line.

15. Re- Engineering of Ultra Mortise & Disc Padlock.

16. Value stream mapping.

17. Work breakdown structure for LP feedwater heater & design of fixture for DSS shells.

18. Improvement in the moulded case circuit breakers.

19. Manufacturing planning of external riser. Alternate lifting method for replacement of STLX.

20. Supply Chain management of primary tar separator.

21. Development in circuit breakers.

22. Fixture design and modifications in die.

23. Strategic Product Improvement.

ISME (Indian Society of Manufacturing Engineers)

ISME is a professional society registered under the Societies Registration ACT XXI of 1860 of Maharashtra state. The main objective of ISME is to advance knowledge in the field of Manufacturing Engineering and Management and provide means and methods for applying such knowledge in practice and in education throughout the country.  It provides channel of  communication for allied societies and institutions in the country and abroad. ISME has a countrywide network comprising of industries, institutions and individual members under various categories. Is has to its credit an eventful professional standing of around three decades. In  the  past,  ISME  has  organized  a  number  of  national  seminars, Training  programmes,  Workshops,  Industrial  Visits and  Technical film shows. Technical lecture meeting on topics of interest are being held on a regular basis. ISME  also  brings  out  its  own  in  house  publication  with  view  to disseminate  technical  information  and  maintain  adequate communication and rapport with its members.

Purpose

DJ-ISME is one of the oldest and most successful student chapter of D.J. Sanghvi. The chapter has proven its success and worth by consecutively winning the award for the Best Student Chapter of D.J. Sanghvi in the years 2017 and 2018. DJ-ISME conducts events, workshops, seminars, guest lectures and IV’s for the students of Mechanical and Production department. ISME also exercises the National initiative of Make in India by conducting the Project Competition under its annual Technical Festival – DJ NIRMITI. The main aim of all the activities under ISME is to give the students an opportunity to connect to the Industry and develop their Technical background.

Connection link : www.ismeindia.org

SAE (Society of Automotive Engineers)

SAE International, initially established as the Society of Automotive Engineers, is a U.S.-based, globally active professional association and standards developing organization for engineering professionals in various industries. It was founded in the year 1905. Its mission is to advance mobility knowledge and solutions for the benefit of humanity. Principal emphasis is placed on transport industries such as automotive, aerospace, and commercial vehicles.

SAE International is a global association of more than 128,000 engineers and related technical experts in the aerospace, automotive and commercial-vehicle industries. SAE Foundation, the charitable arm of SAE International, actively supports many programs, including A World In Motion® and the Collegiate Design Series.

SAEINDIA is a strategic alliance partner of SAE International and is registered in India as an Indian non-profit engineering and scientific society dedicated to the advancement of mobility industry in India.

The SAE D. J. Sanghvi Collegiate Club comes under the Western Section of SAE India.

Purpose:

The purpose of SAE D. J. Sanghvi Collegiate Club is to connect the students of our college with the SAE Organisation through SAE Membership. It organises various Seminars, Workshops, Invited Talks and Value Added Programs for the students of the college so that they can be updated regarding the latest industrial developments in the fields of automobiles, aerospace, designing, etc. It currently has 7 different teams under it, which design and manufacture Automobile & Aeroplane to participate in various SAE International Competitions & other National Competitions. The students have been regularly bringing accolades to the department by winning awards in competitions of International and National repute.

The different teams under the SAE D. J. Sanghvi Collegiate Club are:

• DJS Kronos
• DJS Racing
• DJS Skylark
• DJS Karting
• DJS Helios
• DJS Phoenix
• DJS Speedster

SAE Committee Structure for A.Y. 2018-19

Robotics and Automation Society (RAS)

Robotics and Automation Society (RAS) is an inter-departmental society under branch of Mechanical Engineering of Dwarkadas J. Sanghvi College of Engineering. It’s a student chapter which aims at developing the students in the fields of Robotics and Automation. The chapter strives to achieve its objective by providing practical knowledge on robotics and automation to all the students interested in these fields. The chapter does that by handing over various robotics and automation projects to a group of students, by organizing various robotics workshops, by having industrial visits and by participating in various national and international technical competitions.

Over the past couple of years, the RAS chapter has been handling quite a few numbers of projects such as SCARA Robot, library RFID, Joystick applications etc. and has participated in international technical competition such as ABU Robocon and organized few robotics workshops.

Students from Mechanical Engineering, Electronics Engineering, Electronics and Telecommunication Engineering, Computer Engineering and Information Technology Engineering are a part of this chapter. RAS has grown immensely over the past couple of years in terms of developing practical knowledge in the students of DJSCE.

RAS Committee Structure for A.Y. 2018-19

ISHRAE (The Indian Society of Heating, Refrigeration and Air Conditioning Engineers)

ISHRAE was founded in 1981 at New Delhi by a group of eminent HVAC&R professionals. ISHRAE today has over 17,645 HVAC&R professionals as member and additionally there are 10,695 student- members. ISHRAE operates from 42 chapters and sub chapters spread all over India, with HQ in Delhi. ISHRAE student chapters, present in more than 150 engineering collages, encourage student to opt for careers in the HVAC&R industry. ISHRAE organizes ACREX INDIA, the largest international exposition in south Asia on Air-conditioning, refrigeration, ventilation and building. ISHRAE publication strives to help its members & the industry to be up-to date with the technical developments, latest trends and sunrise technologies.

ISHRAE Objectives:-

• Advancement in art and science of HCVAC&R Engineering and related services.
• Encouragement of science research
• Continuing education of members and other interested persons in the said science through lectures, workshops, product presentation, publications and expositions.

Connection Link: - http://www.ishrae.in/

Purpose

DJ-ISHRAE is a national level student chapter of D. J. Sanghvi college of engineering. Its aim is to support and promote interest in HVAC&R system. It has been the winner and runner up in 2017 & 18 respectively in ISTL (Indian Student Technical League) a national level HVAC&R competition where student has to design a HVAC system for a given plant. The chapter additionally provides career opportunity in HVAC&R to interested students through ‘job junction’ organised by ISHRAE national chapter. The chapter organises various seminars and workshops on R & C, solar energy, Eco-friendly systems, and HVAC. It also organises industrial visits to industries manufacturing HVAC components like copper tubes, solar panels, etc.

CLASS: BE

CLASS: B.E.

SEM: VIII / MAY’ 2015

CLASS: BE

CLASS: BE

CLASS: BE